Owners manual

39Rack Power Filter: Web Interface
Web Interface Features
Read the following to familiarize yourself with basic Web interface features for your Power Filter.
Tabs
The following tabs are available:
• Device Summary: Appears when you log on. View active alarms, the load status of the Power
Filter, and the most recent device events. For more information, see “About the Device Summary
Tab” on page 53.
• Status: View utility source status, view total load status, view outlets status and power-saving
feature status. Reset the accumulated saved energy. For more information, see “About the Device
Manager Tab” on page 56.
• Configuration and Control: Control the outlets. Configure the unit, and outlets. For more
information, see “About configuration and control Tab on page xx.
• Logs: View event, data, and system logs.
• Administration: Configure security, network connection, notification, and general settings.
Device status icons
One or more icons and accompanying text indicate the current operating status of the Power Filter:
At the upper right corner of every page, the Web interface displays the same icons currently displayed on
the Device Summary page to report Power Filter status:
• The No Alarms icon if no alarms exist.
• One or both of the other icons (Critical and Warning) if any alarms exist, and after each icon, the
number of active alarms of that severity.
To return to the Device Summary tab to view its summary of the Power Filter status, including the
active alarms, click a quick status icon on any page of the interface.
Symbol Description
Critical: A critical alarm exists, which requires immediate action.
Warning: An alarm condition requires attention and could jeopardize your data or equipment
if its cause is not addressed.
No Alarms: No alarms are present, and the UPS and NMC are operating normally.