Owners manual

31Rack Power Filter: Command Line Interface
Description: View or set the over-voltage warning threshold.
Example1: View the threshold of the high voltage warning.
apc> devOverVolt
E000: Success
Over Voltage Threshold: 140 VAC
Example 2. Set the low voltage warning threshold to 139 V.
apc> devOverVolt 139
E000: Success
devReading
Access: Administrator, Device User
Description: View the total energy being used by the device.
Example: View the current (Amps), total power (Watts), input voltage (V), and input frequency (Hz).
apc> devReading pwr
E000: Success
Output Power: 5.2 W
apc> devReading cur
E000: Success
Output Current: 0.3 A
apc> devReading volt
E000: Success
Line Voltage: 124 V
apc> devReading freq
E000: Success
Line Frequency: 60 Hz
apc> devReading ?
Display the output power readings and input source readings
devReading [pwr | cur | volt | freq]
bkLowLoad
devStatus
Access: Administrator, Device User
Description: View the status of the device.
Example:
apc> devStatus
E000: Success
Line OK: Good
Wiring OK: Good