Owners manual

29Rack Power Filter: Command Line Interface
xferINI
Access: Administrator only
Description: Use XMODEM to upload an INI file while you are accessing the command line interface
through a serial connection. After the upload completes:
• If there are any system or network changes, the command line interface restarts and you must log
on again.
• If you selected a baud rate for the file transfer that is not the same as the default baud rate for the
Rack Power Filter, you must reset the baud rate to the default to reestablish communication with
the Rack Power Filter.
xferStatus
Access: Administrator only
Description: View the result of the last file transfer.
See “Verifying Upgrades and Updates” on page 99 for descriptions of the transfer result
codes.