Owners manual

SwitchedRack Power Filter: Command Line Interface24
Example: To determine whether a device with an IP address of 150.250.6.10 is connected to the
network, type:
ping 150.250.6.10
portSpeed
Access: Administrator
Description:
Example:
To configure the TCP/IP port to communicate using 100 Mbps with half-duplex
communication (communication in only one direction at a time), type:
portspeed -s 100H
prompt
Access: Administrator, Device User
Description: Configure the command line interface prompt to include or exclude the account type of
the currently logged-in user. Any user can change this setting; all user accounts will be updated to use the
new setting.
Example: To include the account type of the currently logged-in user in the command prompt, type:
prompt -s long
quit
Access: Administrator, Device User, Outlet User
Description: Exit from the command line interface session (this works the same as the exit command).
Option Arguments Description
-s auto | 10H | 10F |
100H | 100 F
Define the communication speed of the Ethernet port. The auto command
enables the Ethernet devices to negotiate to transmit at the highest possible
speed. See “Port Speed” on page 63 for more information about the port
speed settings.
Option Argument Description
-s long The prompt includes the account type of the currently logged-in user.
short The default setting. The prompt is four characters long: APC>