Owners manual

SwitchedRack Power Filter: Command Line Interface12
About the Main Screen
Following is an example of the main screen, which is displayed when you log on to the command
line interface of a Rack Power Filter.
• Two fields identify the APC operating system (AOS) and application (APP) firmware versions.
The application firmware name identifies the type of device that connects to the network. In the
example above, the application firmware for the Rack Power Filter is displayed.
Network Management Card AOS vx.x.x
Pro AV vx.x.x
• Three fields identify the system name, contact person, and location of the Rack Power Filter.
Name : Test Lab
Contact : Don Adams
Location : Building 3
• An Up Time field reports how long the Rack Power Filter has been running since it was last
turned on or reset.
Up Time : 45 Days, 21 Hours, 21 Minutes
• Two fields identify when you logged in, by date and time.
Date : 12/30/2010
Time : 5:52:30
• The User field identifies whether you logged in through the Administrator or Device Manager
account. (The Read Only User account cannot access the command line interface.)
User : Administrator
American Power Conversion Network Management Card AOS vx.x.x
(c)Copyright 2010 All Rights Reserved Pro AV 2PPP x.x.x
--------------------------------------------------------------------------
Name : RackProAV Date : 12/30/2010
Contact : Don Adams Time : 5:58:30
Location : Building 3 User : Administrator
Up Time : 45 Days, 21 Hours, 21 Minutes Stat : P+ N4+ N6+ A+
APC>