Instruction manual

Pg.16 – Instructions Version 1.1, January 2009
45. Aileron-Rudder Mix: Setup your computer
radio with an Aileron-to-Rudder mix of
approx. 25%. This means when you move
the Aileron stick to the LEFT (left aileron
moves up), the Rudder will also move to the
LEFT about 1/4" (6mm). Then move the
aileron stick to the full right position (right
aileron up) and the Rudder should also
move to the right about 1/4” (6mm). We
leave ours “ON” all the time.
46. Alternate Aileron Differential Method: If you
are using a radio that does not have the
capability to use a separate channel for
each aileron as set up above, offset each
control horn toward the front of the wing.
This photo shows the left aileron servo as
viewed from the left wingtip. The servo and
aileron are both in the center (neutral)
position. This allows the aileron to travel up
more and travel down less (aileron
differential).