Specification

Life is On | APC 7
Surge protection
Surge‑protected outlets proactively protect components and eliminate
potential insurance claim hassles. They provide guaranteed protection
against surges, spikes, and even lightning. Tested to the toughest
standards of UL 1449 and IEEE, APC AV offers very low let‑through voltage
ratings, ensuring the best level of protection. (All APC products except
model INWALLKIT)
Isolated noise filtering
Isolated EMI/RFI noise filter banks maximize sound and video quality, and
allow your system to perform to its best capabilities. All APC AV solutions
virtually eliminate EMI/RFI on the AC power circuit. (All APC AV products)
Voltage regulation
Voltage regulation prevents the most common power disturbances
fromimpacting audio and video quality and stressing component power
supplies. APC AV’s automatic voltage regulation (AVR) corrects sags
(lowAC voltage) and swells (high AV voltage) to keep the RMS voltage
withinproper operating ranges for component power supplies. This helps
systems perform at maximum capability and efficiency. (H Type and SType)
Pure sine wave battery backup
In the event of a power outage, an extremely deep power sag, or overvoltage,
pure sine wave power from internal batteries will keep an entire system up
and running without any interruption or loss of presets, DVR recordings,
ormedia server data. APC AV solutions feature an inverter that outputs
apure sine wave when on battery, ensuring the purest power possible
forall your components. (S Type only)
Legendary Reliability
TM
from the world leader
in power protection.
APC AV offers a comprehensive range of power protection solutions,
allowinginstallers tocustomizetheir solutions for every home.
Network management
andenvironmental monitoring
Remote control capabilities via an internal
web server help eliminate costly and
time‑consuming service calls. Installersand
users can use the Internet to remotely reboot
hung equipment, adjust various unit parameters,
initiate self‑tests, and monitor changing unit
and power conditions. Further, an RS232 port
enables installers to integrate the unit into their
preferred home automation network with full
access to all of its management capabilities.
Abuilt‑in environmental monitoring port allows
for both temperature and humidity monitoring
andreporting. For example, the automation
control unit can be programmed to respond to
an alarm caused by an overheated rack by safely
shutting down the equipment until the problem is
addressed. (S20BLK only)
Approved by Underwriters Laboratories
®
(UL)
Unlike some other vendors’ AV power solutions,
all APC products are listed to the relevant
safety agency requirements. This helps ensure
products function safely and reliably. The
National Electrical Code
®
requires that all
electronics are listed to the relevant standards by
a Nationally Recognized Testing Laboratory such
as UL, CSA, or TÜV. Beware of products that
simply claim to “meet” or are “tested to” these
safety standards. Products should be “listed.”
(All APC AV products)