Installation Guide

Back-UPS Pro BX850/1000/1350/1500M/M-LM60
7
System Errors
The Back-UPS will display these error messages. Except for errors F01 and F02,
contact SEIT Technical Support.
Function Button Quick Reference
F01
On-Battery
Overload
Turn the Back-UPS off.
Disconnect non-essential
equipment from the Battery
Backup outlets and the turn
Back-UPS on.
F02
On-Battery
Output Short
Turn the Back-UPS off.
Disconnect all equipment
from the Battery Backup
outlets and the turn Back-
UPS on.
Re-connect equipment one
item at a time. If the output
is tripped again, disconnect
the device that caused the
error.
F03
On-Battery Xcap
Overload
Errors F03-F09 cannot be
corrected by the user,
contact SEIT Technical
Support for assistance.
F04
Clamp Short
F05
Charge Error
F06
Relay Welding
F07
Temperature
F09
Internal Error
Function Button
Timing
(seconds)
UPS
Status Description
Power
Power On
0.2 Off Press
POWER to start receiving input
AC power. If AC input power is not
available, the Back-UPS will run on
battery power.
Power Off
2 On The Back-UPS is not receiving input
AC power, but is providing surge
protection.
Display
Status Inquiry
0.2 On Verify the status or condition of the
Back-UPS. The LCD will illuminate
for 60 seconds. Press the button the
toggle into various information.
bu088a