Installation Guide
Table Of Contents
- Safety and General Information
- Inventory
- Connect the Battery
- Install PowerChute™ Personal Edition Software
- Connect the Equipment
- Operation
- Alarms and System Errors
- Function Button Quick Reference
- Troubleshooting
- Specifications
- Replacement Battery
- Warranty
- APC by Schneider Electric IT Customer Support Worldwide
- EMC Compliance
- User Manual Back-UPS™ Pro BX850/1000/1350/1500M/M-LM60
Back-UPS Pro BX850/1000/1350/1500M/M-LM602
BX1350/1500M/M-LM60
Install PowerChute
™
Personal Edition Software
Use PowerChute Personal Edition software to configure the UPS settings. During a
power outage, PowerChute will save any open files on your computer and shut it
down. When power is restored, it will restart the computer.
Note: PowerChute is only compatible with a Windows operating system. If you are
using Mac OSX, use the native shutdown feature to protect your system. See the
documentation provided with your computer.
Installation
Use the cable supplied with the Back-UPS to connect the data port on the Back-UPS
to the USB port on your computer. On the computer, go to www.apc.com Search for
“PowerChute Personal Edition” then click on “View Details” to download the latest
Push the battery into the unit. Replace the battery door.
Remove the battery door. Remove the battery.
Flip or turn the battery 180 degrees
upward/downward to let green side of the
label face up.
Push the battery into the unit.
Replace the battery door.
bu026c
bu0 55 b
bu059b
bu05 8b
bu060b