User Manual

Features

ON/OFF button with indicator

Battery connector

Input power cord

Circuit breaker

Easy UPS BV Series 500VA, 650VA, 800VA, 1000VA

Model

Output Type

and Quantity

BV500I

BV650I

BV800I

BV1000I

x 6

BV500I-GR

BV650I-GR

BV800I-GR

BV1000I-GR

x 4

BV500I-MS

BV650I-MS

BV800I-MS

BV1000I-MS

x 4

Place and Power On

1. Place the Easy UPS to avoid:

 Direct sunlight

 Excessive heat

 Excessive moisture

 Excessive dust/dirt

For operation, please place the unit on the floor.

2. Connect the battery by pulling the battery handle up,

and then pushing it into the unit.

3. Connect equipment to the UPS. Avoid using extension cords.

4. Plug the Easy UPS power cord directly into a wall outlet, not into a surge protector or power strip.

5. Press the ON/OFF button to turn on the unit.

The green “Power On” indicator confirms that the Easy UPS is on and ready to provide protection.

The Easy UPS should charge for at least 6 hours to ensure sufficient runtime. The unit is

being charged whenever it is connected to AC power, whether the unit is turned ON or OFF.

NEMA jumper Cable for PC connection

*only for the model with Universal outlet

IEC jumper Cable for PC connection

*only for the model with IEC outlet

*only for model with Schuko outlet

Battery backup and surge protected outlets

AC power inlet with AC fuse

*only for model with Schuko outlet