User's Manual

Back-UPS Pro BR1500MS2
9
Function Button Quick Reference
Function Button
Timing
(seconds)
UPS
Status Description
POWER
Power On
0.2 Off
Press POWER to start receiving input AC power. If
AC input power is not available, the Back-UPS will
run on battery power.
Power Off
2On
The Back-UPS is not receiving input AC power,
but is providing surge protection.
DISPLAY
Status
Inquiry
0.2 On
Verify the status or condition of the Back-UPS. The
LCD will illuminate for 60 seconds. Press the
button the toggle into various information.
Full-Time/
Power-
Saving mode
2On
The LCD will illuminate and the Back-UPS will
beep to confirm the Full-Time mode. The LCD will
darken and the Back-UPS will beep to confirm the
Power-Saving mode. While in Power-Saving
Mode, the LCD will illuminate if a button is
pressed, then darkens after 60 seconds of no
activity.
MUTE
Enable/
Disable
mode
2On
Enable or disable the audible alarms. The Mute
icon will illuminate and the Back-UPS will beep
one time.
SENSITIVITY
6Off
The Load Capacity icon will blink, indicating that
the Back-UPS is in programming mode. Use the
P
OWER button to scroll through Low, Medium, and
High, stop at selected sensitivity. The Back-UPS
will beep to confirm selection. See "Unit
sensitivity" for details.
SELF-TEST
(manual)
6On
The Back-UPS will perform a test of the internal
battery. Note: This will happen automatically when
the Back-UPS is turned ON or when the Back-UPS
previously detected a bad battery.
EVENT
R
ESET
0.2 On
When the Event screen is visible, press and hold
DISPLAY, then press POWER, to clear the detected
error event counter.
ERROR
RESET
2Error
detected
After a detected error has been identified, press
P
OWER to remove the visual indication and return
to standby status.