User's Manual

Back-UPS Pro BR1500MS24
 USB and
Serial Data
port
To use PowerChute Personal
Edition, connect the supplied
USB communication cable or
an optional serial cable (not
supplied).
 Ground
screw
Connect the ground lead from
an additional surge
suppression device such as a
stand-alone data line surge
protector.
 Building
Wiring
Fault
indicator
If this indicator is illuminated,
there is a detected problem
with the wiring in the building.
Contact an electrician
immediately and do not use the
Back-UPS.
 Coaxial
ports with
surge
protection
Connect a cable modem or
other equipment with coaxial
jacks.
 Circuit
Breaker
Use to reset the system after an
overload condition has
occurred causing the circuit
breaker to trip.
 Surge
Protected
outlets
These outlets provide full-time protection from surges, even if the
Back-UPS is off. Connect equipment such as printers and scanners that
do not require battery backup protection.
 In/Out
Ethernet
surge-
protected
ports
Use an Ethernet cable to connect a cable modem to the I
N port, and
connect a computer to the O
UT port.
 Battery
Backup
outlets with
Surge
Protection
During a power outage or other detected AC problems, the Battery
Backup outlets receive power for a limited time from the Back-UPS.
Connect critical equipment such as desktop computer, computer
monitor, modem or other data sensitive devices into these outlets.