User's Manual
Table Of Contents
- Important Safety Instructions
- Inventory
- Connect the Battery
- Install PowerChute™ Personal Edition Software
- Connect the Equipment
- Operation
- Detected Alarms and System Errors
- Function Button Quick Reference
- Troubleshooting
- Specifications
- Replacement Battery
- Warranty
- APC by Schneider Electric IT Customer Support Worldwide
- EMC Compliance
- User Manual Back-UPS™ Pro BR1500MS2
Back-UPS Pro BR1500MS22
Inventory
Connect the Battery
The UPS is shipped with the battery disconnected.
Coaxial Cable
USB communication cable
Lay the UPS with the battery door facing up.
The arrows point to the locking tabs of the
battery compartment.
Press the tabs downwards and pull the
battery door away from the unit to access
the battery modules.
Using the handles on both sides of the
battery, lift the battery 30 degrees upward to
expose the battery connector. Connect the red
wire as shown above.
Push the battery into the unit.
Replace the battery door.
bu476a
bu471a
b
u
4
7
2
a
bu473a
bu474a
b
u
4
7
5
a