User's Manual

Back-UPS Pro BR1500MS2
11
Specifications
Replacement Battery
The battery typically lasts for 3 to 5 years, a shorter period if subjected to
frequent outages or elevated temperatures. Battery replacement parts for
Back-UPS Pro BR1500MS2 is APCRBC163. Delaying the replacement of
parts may corrode the batteries in the cartridge. Recycle spent battery
cartridges.
Warranty
The standard warranty is three (3) years from the date of purchase. Schneider
Electric IT (SEIT) standard procedure is to replace the original unit with a
factory reconditioned unit. Customers who must have the original unit back
due to the assignment of asset tags and set depreciation schedules must
declare such a need at first contact with an SEIT Technical Support
representative. SEIT will ship the replacement unit once the defective unit
has been received by the repair department, or cross ship upon the receipt of
a valid credit card number. The customer pays for shipping the unit to SEIT.
SEIT pays ground freight transportation costs to ship the replacement unit to
the customer.
VA
1500 VA
Maximum Load
900 W
Nominal Input Voltage
120 V
Online Input Voltage Range
88 - 147 V
Automatic Voltage Regulation
Boost by +11.5% when input voltage drops below limit
Trim by -11.5% when input voltage exceeds limit
Frequency Range
60 Hz ± 3 Hz
On-battery Waveshape
Sine-wave
USB charging port
Type C*1, Type A*1 (15 W in total)
Typical Recharge Time
16 hours
Transfer Time
8 ms, maximum
Operating Temperature
32 to 104
o
F (0 ~ 40
o
C)
Storage Temperature
23 to 113
o
F (-15 ~ 40
o
C)
Unit Dimensions
11.9 × 4.4 × 15.0 in (368 × 100 × 260 mm)
Unit Weight
27.6 lb (12.5 kg)
Interface
USB and Simple Signal (Serial Data Port)
On-Battery Runtime
Go to: http://www.apc.com/product
International Protection Code
IP20