User Manual
Table Of Contents
- Important Safety Information
- Product Handling Guidelines
- Safety and General Information
- Inventory
- Connect the Battery
- Wall Mount Installation
- Panel Features
- Specifications
- Turn On the Back-UPS
- Turn Off the Back-UPS
- Mute
- UPS Self Test
- PowerChute™ Personal Edition Software
- Status Indicators
- Voltage Sensitivity Adjustment (Optional)
- Replace Battery
- Troubleshooting
- Warranty
- Service
- APC by Schneider Electric IT Customer Support Worldwide
- User Manual Back-UPS™ BE650G2-RS and BE850G2-RS
Back-UPS BE650G2-RS/BE850G2-RS4
Wall Mount Installation
Panel Features
Reinstall the battery compartment
cover. Be sure that the release tabs
lock into place.
CAUTION
RISK OF FALLING EQUIPMENT
Always practice safe lifting techniques adequate for the weight of the
equipment.
Failure to follow these instructions can result in minor or
moderate injury and equipment damage.
Horizontal mounting Vertical mounting
• Secure 3 screws of
appropriate size (not supplied)
as per dimensions shown in
the horizontal/vertical
mounting illustrations.
• Allow the screw to protrude
out 8mm from the wall.
• Mount the Back-UPS on to
the screws.
Top Panel Side Panel
b
u
4
9
4
a
310 mm
80 mm
310 mm
80 mm
bu495a
bu 49 6a