User Manual
Table Of Contents
- Important Safety Information
- Product Handling Guidelines
- Safety and General Information
- Inventory
- Connect the Battery
- Wall Mount Installation
- Panel Features
- Specifications
- Turn On the Back-UPS
- Turn Off the Back-UPS
- Mute
- UPS Self Test
- PowerChute™ Personal Edition Software
- Status Indicators
- Voltage Sensitivity Adjustment (Optional)
- Replace Battery
- Troubleshooting
- Warranty
- Service
- APC by Schneider Electric IT Customer Support Worldwide
- User Manual Back-UPS™ BE650G2-RS and BE850G2-RS
Back-UPS BE650G2-RS/BE850G2-RS
3
• CAUTION: Before installing or replacing the batteries, remove
conductive jewelry such as chains, wrist watches, and rings.
High energy through conductive materials could cause severe burns.
• CAUTION: Do not dispose of batteries in a fire. The batteries may
explode.
• CAUTION: Do not open or mutilate batteries. Released material is
harmful to the skin and eyes and may be toxic.
Inventory
Connect the Battery
Back-UPS Quick start guide
Remove the “Stop! Connect Battery” label from the top cover.
Invert the Back-UPS. Press the battery
compartment cover and release the
tabs. Slide open the battery cover.
Connect the battery cable securely to
the battery terminal.
Note: It is normal for small sparks to
be seen when the battery cable is
connected to the battery terminal.
b
u
4
9
1
a
b
u
4
9
2
a
b
u
4
9
3
a