User Manual
Table Of Contents
- Important Safety Information
- Product Handling Guidelines
- Safety and General Information
- Inventory
- Connect the Battery
- Wall Mount Installation
- Panel Features
- Specifications
- Turn On the Back-UPS
- Turn Off the Back-UPS
- Mute
- UPS Self Test
- PowerChute™ Personal Edition Software
- Status Indicators
- Voltage Sensitivity Adjustment (Optional)
- Replace Battery
- Troubleshooting
- Warranty
- Service
- APC by Schneider Electric IT Customer Support Worldwide
- User Manual Back-UPS™ BE650G2-IT and BE850G2-IT
Back-UPS BE650G2-IT/BE850G2-IT6
DSL/modem
network/fax
port
Connect a DSL or Dial-up modem, Phone, Fax machine, or
10/100 Base-T Ethernet equipment.
Note: Do not connect the UPS telephone protection ports to both the
telephone and network system cables at the same time.
Wall outlet Connect the Back-UPS to a data line wall outlet.
Data port Connect a RJ45/USB cable (not supplied) to connect the Back-UPS to
a computer for installing the software. See “UPS Self Test” on page 8
for details.
Circuit
breaker
Trips when the Back-UPS experiences an overload condition.