Specifications

Back-UPS Pro 500 BG500 120 Vac2
Battery Replacement
Always recycle used batteries.
For information on recycling a used battery, refer to the Battery Disposal
Information sheet included with the replacement battery.
Replace used batteries with APC approved batteries. To order a replacement battery go to the APC by Schneider
Electric Web site, www.apc.com.
Unit Weight 2.2 kg (4.85 lbs)
Interface Web page
On Battery Runtime
Go to: www.apc.com
Battery Capacity
2.3 Ah
Battery Voltage
13.2 V typical
Battery Output Current
40A continuous
Battery Weight
0.53 kg (1.17 lbs)
Battery Dimensions
7.74 x 15.23 x 4.16 cm (3.05 x 6 x 1.64 in)
Supported OS
Windows XP, Windows Vista, Windows 7, Windows 8 and Mac OS X
(USB)
Windows XP, Windows Vista, Windows 7 (software)
EMI Compliance
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Notice: This device complies with part 68 and part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
“Locate the label on the bottom of this device that contains, among other
information, the FCC registration number and ringer equivalence number
(REN) for this device. If requested, this information must be provided to
the telephone company.”
USB Compliance
USB-If Basic Speed
UPS Model Replacement Battery
BG500 APCRBC146-LI
Li-ion