Specifications

Back-UPS Pro 500 BG500 120 Vac30
UPS Menu
UPS Settings
Path: UPS > Settings
System Time Configuration
System Time page. Set the time and date used by the UPS. You can change the current settings manually or
through a Network Time Protocol (NTP) Server:
• Apply Local Computer Time: Select to match the date and time settings of the computer you are using.
• Manual Mode: Enter the Time Zone, date and time for the UPS.
• Synchronize with NTP Server: Have an NTP Server define the date and time for the UPS.
Setting Definition
Device Description
A description that the user specify to identify the UPS. This also appears in the
Device IP Configuration Wizard and can be used to identify individual systems
when more than one network enabled APC UPS is on the network.
Audible Alarm
Enable or disable the audible alarm of the UPS, and, for some UPS models, define
the condition that will cause the alarm to sound.
Last Battery Replacement Enter the month and year of the most recent battery replacement.
Maximum Battery
Runtime
Defines the amount of available battery runtime, in seconds, at which the UPS sends
the signal for a low-battery condition.
Time Zone
Select a time zone. The number of hours preceding each time zone in the list is
the offset from Coordinated Universal Time (UTC), formerly Greenwich
Mean Time.
bu282a