Specifications

Back-UPS Pro 500 BG500 120 Vac 27
Web User Interface
Introduction
Overview
The Web user interface provides options to manage the UPS and to view the status of the UPS.
Supported Web browsers
You can use Microsoft
®
Internet Explorer
®
(IE) 7.x or higher (on Windows
®
operating systems only) or Mozilla
®
Firefox
®
3.0.6 or higher (on all operating systems) to access the UPS through its user interface. Other commonly
available browsers might work but have not been fully tested.
The UPS cannot work with a proxy server. Before you can use a browser to access the user interface, you must do
one of the following:
• Configure the browser to disable the use of a proxy server.
• Configure the proxy server so that it does not proxy the specific IP address.
URL address formats
Type the IP address or DNS name of the UPS in the Web browser’s URL address field and press ENTER. When you
specify a non-default Web server port in Internet Explorer, you must include http:// in the URL.
Common browser error messages at log-on.
URL format examples.
User Overview
You can use the DNS name or the System IP address of the UPS for the URL address of the user interface. Use
your case-sensitive user name and password to log on. The default administrator’s user name is apc.
The default password is apc.
You can set your user interface language as you log on by choosing a language from the Language drop-down box.
Error Message Browser Cause of the Error
“This page cannot be displayed.” Internet Explorer
Web access is disabled, or the
URL was not correct.
“Unable to connect.” Firefox
Example and Access Mode URL Format
System IP address of 139.225.6.133 and a default
Web server port (80)
HTTP http://139.225.6.133
DNS name of Web1
HTTP http://Web1
System IPv6 address of 2001:db8:1::2c0:b7ff:fe00:1100
HTTP http://[2001:db8:1::2c0:b7ff:fe00:
1100]