Specifications

Back-UPS Pro 500 BG500 120 Vac 25
d) Look for the line with IPv4 and the number on the right is
your IP Address. All you need are the first 3 numbers. Enter
that into your Device IP Configuration Wizard Starting IP.
The forth number will always be 1.
3. After the Back-UPS Pro has searched the network, the
Back-UPS Pro unit should be listed in a table within the
Utility. Click on its IP Address to access the management
interface. If you have multiple Back-UPS units or other
network manageable APC UPS’es there may be multiple
entries, match the MAC Address on the black tab in the
battery door of the Back-UPS Pro to the MAC Address
listed in the utility. Click this IP Address to access the
management interface. Bookmark this IP Address and
save it for future reference.
Reset Network to default. If the Device IP Configuration Utility is unable to find your Back-UPS Pro unit,
make sure that both the PC and the Back-UPS Pro are on the same network. If that is the case then it may be
necessary to press the Network Reset button in the rear panel for 20 seconds to reset the network interface. Once
the system has restarted return to the Device IP Configuration Utility and search for your Back-UPS Pro unit again.
Access the Web management interface
To access the Web page of Back-UPS Pro on the network:
1.Open up any browser and address the Back-UPS Pro by
the IP address that the Device IP Configuration Utility
found for the Back-UPS Pro unit.
2.Enter the user name and password (by default, use apc
and apc to login as the administrator).
bu347a
bu276a
bu277a