Specifications

Back-UPS Pro 500 BG500 120 Vac 23
How to use the Wizard to discover TCP/IP settings
The Device IP Configuration Wizard configures the IP address, the subnet mask, and the default gateway of one or
more UPS devices.
The Wizard is for IPv4 only. For detailed information on the Wizard, see the Knowledge Base on the
support page of the www.apc.com website and search for 3061 (the ID of the relevant article).
To use the DHCP Option 12 (AOS 5.1.5 or higher), see Knowledge Base ID 8853.
Installation of the Device IP Config Wizard. The Software and Documentation CD contains the
installation program of the Wizard. The Wizard runs on Microsoft Windows 2000, Windows Server
®
2003,
Windows XP, Windows Vista, Windows 7 and Windows 8 operating systems. For users of non-Windows based
operating systems the IP Address can be obtained by accessing your router and looking at DHCP tables.
1.If autorun is enabled, a browser should open the home page of the CD immediately after being inserted.
Otherwise, open the contents.htm file from the CD to access the home page.
2.From the home page click the Device IP Configuration Wizard link.
3.From the Device IP Configuration Wizard page click the Install the Wizard link to run the setup file directly or
save the file to your local hard drive and run it locally
.
To Download Device IP Configuration from the APC by Schneider Electric Website.
1.Go to www.apc.com/tools/download.
2.Download the Device IP Configuration Wizard.
3.Run the executable file in the folder from where it was downloaded. Go back to Step 4 under the Installation of
the Device IP Config Wizard section.

Click on Next. Click on I Agree.

Click on Install. Click Finish to complete the utility installation.
bu271a
bu272a
bu273a
bu274a