User`s guide
®
USER’S GUIDE
AUTOMATIC TRANSFER SWITCH
94
SSL Server Certificate
Filename You can create a server certificate with the APC Security Wizard and
then upload it to the Automatic Transfer Switch by using the Web
interface. Use the Browse button for the Filename field to locate the file,
then click Apply. By default, the certificate is installed to the correct
location.
Alternatively, you can use FTP or SCP to transfer the server certificate to
the Automatic Transfer Switch. However, you must specify the correct
location (/sec) on the Automatic Transfer Switch.
N
OTE: Creating and uploading a server certificate in advance reduces
the time required to enable HTTPS (SSL). If no server certificate is
loaded when you enable HTTPS (SSL), the Automatic Transfer Switch
creates one when it reboots. The Automatic Transfer Switch can take
up to 5 minutes to create this certificate, and the SSL server is not
available during that time.
Option Description