User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
90
• Identify whether a server certificate is installed on the Automatic
Transfer Switch. If a certificate has been created with the APC Security
Wizard but is not installed:
– In the Web interface, browse to the certificate file and upload it to the
Automatic Transfer Switch.
– Alternatively, use the SCP protocol or FTP to upload it to the
location \sec on the Automatic Transfer Switch.
• Display the configured parameters of a digital server certificate, if one
is installed.
Creating and uploading a server certificate in advance
reduces the time required to enable HTTPS (SSL/TLS). If no
server certificate is loaded when you enable HTTPS (SSL/
TLS), the Automatic Transfer Switch creates one when it
reboots. The Automatic Transfer Switch can take up to 5
minutes to create this certificate, and the SSL/TLS server
is not available during that time.