User`s guide

USER’S GUIDE

AUTOMATIC TRANSFER SWITCH

6. Press ENTER as many times as necessary to redisplay the User Name

prompt, then use the default, apc, for the user name and password. (If

you take longer than 30 seconds to log on after the User Name prompt

is redisplayed, you must repeat step 5 and log on again.)

7. From the Control Console menu, select System, then User

Manager.

8. Select Administrator, and change the User Name and Password

settings, both of which are now defined as apc.

9. Press

CTRL-C, log off, reconnect any serial cable you disconnected,

and restart any service you disabled.