User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
58
Event Recipients
Overview
The Web interface and control console both have options that allow you to
define up to four trap receivers and up to four e-mail addresses to be used
when an event occurs that has the SNMP traps or e-mail enabled.
Trap Receiver settings
To define the Trap Receiver settings that allow you to define which NMSs
receive traps:
• In the Web interface, use the Recipients option in the Events menu.
• In the control console, use the SNMP option in the Network menu.
Item Definition
Community Name The password (maximum of 15 characters) used when
traps are sent to the NMS identified by the Receiver
NMS IP/Domain Name setting.
Receiver NMS IP/Domain
Name
The IP address or domain name of the NMS that will
receive traps. 0.0.0.0 (the default value) causes traps
not to be sent to any NMS.
Generation (Web Interface)
Trap Generation (control
console)
Enables (by default) or disables the sending of any traps
to the NMS identified by the Receiver NMS IP/Domain
Name setting.
Authentication Traps Enables or disables the sending of authentication traps
to the NMS identified by the Receiver NMS IP/Domain
Name setting.