User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
49
Logged events
By default, the following events are logged:
• Any event that causes an SNMP trap, except for SNMP authentication
failures.
• The Network Management Card’s abnormal internal system events.
To disable the logging of events based on their assigned severity level, use
the Actions option in the Web interface’s Events menu.
Even if you disable the Event Log for all severity levels, some system
(Network Management Card) events will still be logged because some of
those events have no severity level.
Web interface
The Log option in the Events menu accesses the Event Log. This log
displays, in reverse chronological order, all of the events that have been
recorded since the log was last deleted. The Delete Log button clears all
events from the log.
See Event Actions (Web Interface Only).
To access a list of the system (Network Management Card)
and Automatic Transfer Switch events, see “Event List” page.