User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
1
Introduction
Product Description
Available interfaces
The Automatic Transfer Switch (ATS) can be managed locally with internal
menus accessed through a serial connection. This connection can also be
used to access the Management Card.
The Management Card has two internal interfaces (control console and
Web interface), which provide menus with options that enable you to
manage the Automatic Transfer Switch and the Management Card. The
Management Card’s SNMP interface enables you to use an SNMP browser
with the PowerNet
®
Management Information Base (MIB) to manage the
Automatic Transfer Switch.
To manage the unit remotely, use a Web browser for the Web interface, or
Telnet or Secure SHell (SSH) for the control console interface.
See Web Config for more information on accessing the
Management Card using the serial connection.
See also
For more information about the Management Card’s internal
user interfaces, see Control Console and Web Interface.
To use the PowerNet MIB with an SNMP browser, see the
PowerNet
®
SNMP Management Information Base (MIB)
Reference Guide (.\doc\en\Mibguide.pdf), which is provided
on the APC Automatic Transfer Switch Utility CD.