User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
26
Information and status fields
Main screen information fields. The main screen provides the following
information:
• Two fields identifying the APC operating system (AOS) and application
(APP) firmware versions. The application firmware uses a name that
identifies the type of device that the Network Management Card
connects to the network. In the Example main screen, the Network
Management Card uses the application firmware for the Automatic
Transfer Switch.
Network Management Card AOS v2.6.4
Automatic Transfer Switch APP v2.6.1
Three fields identify the system Name, Contact, and Location values.
Name : Switch_1
Contact : Tom_Adams
Location : TestLab
ti
•An Up Time field reports how long the Network Management Card has
been running since it was last turned on or reset.
Up Time : 1 Day 4 Hours 5 Minutes
• Two fields identify when you logged on, by Date and Time.
Date : 08/01/2004
Time : 05:49:30
•A User field identifies whether you logged on as an Administrator or
Device Manager.
User : Administrator
To set the Name, Contact, and Location values, see System
Menu.