User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
170
Instructions for using SCP. To use SCP to upgrade the firmware for one
Automatic Transfer Switch:
1. Identify and locate the firmware modules described in the preceding
instructions for FTP.
2. Use an SCP command line to transfer the AOS firmware module to the
Automatic Transfer Switch. The following example assumes a
Automatic Transfer Switch IP address of 158.205.6.185, and an AOS
module of apc_hw02_aos_264.bin.)
scp apc_hw02_aos_264.bin apc@158.205.6.185:apc_hw02_aos_264.bin
3. Use a similar SCP command line, with the name of the application
module instead of the AOS module, to transfer the application module
to the Automatic Transfer Switch.