User`s guide

USER’S GUIDE

AUTOMATIC TRANSFER SWITCH

157

Detailed procedures

Use the following procedures to retrieve the settings of one Automatic

Transfer Switch and export them to one or more other Automatic Transfer

Switches.

Retrieving. To set up and retrieve an .ini file to export:

1. Configure an Automatic Transfer Switch with the settings you want to

export.

2. Use FTP to retrieve the file config.ini from the Automatic Transfer

Switch you configured:

a. Open a connection to the Automatic Transfer Switch, using its IP

Address. For example:

ftp> open 158.165.2.132

b. Log on, using the Administrator user name and password configured

for the Automatic Transfer Switch.

c. Retrieve the config.ini file containing the Automatic Transfer

Switch’s current settings:

ftp> get config.ini

The file is written to the folder from which you launched FTP.

To avoid errors, configure the Automatic Transfer Switch by

using its Web interface or control console whenever

possible. Directly editing the .ini file risks introducing errors.