User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
146
Load the server certificate to the Automatic Transfer Switch.
Perform these steps:
1. On the Network menu of the Web interface of the Automatic Transfer
Switch, select the Web/SSL option.
2. In the SSL/TLS Server Certificate section of the page, browse to the
server certificate, the .p15 file you created in the procedure Import the
signed certificate. (The default location is C:\Program Files\American
Power Conversion\APC Security Wizard.)
Alternatively, you can use FTP or SCP to transfer the server
certificate to the Automatic Transfer Switch. If you use FTP
or SCP for the transfer, you must specify the correct location,
\sec, on the Automatic Transfer Switch. For SCP, the
command to transfer a certificate named cert.p15 to a
Automatic Transfer Switch with an IP address of
156.205.6.185 would be:
scp cert.p15 apc@156.205.6.185:\sec\cert.p15