User`s guide

USER’S GUIDE

AUTOMATIC TRANSFER SWITCH

109

Boot Mode

Introduction

Overview

In addition to using a BOOTP server or manual settings, the Automatic

Transfer Switch can use a dynamic host configuration protocol (DHCP)

server to provide the settings that it needs to operate on a TCP/IP network.

The method that is used to provide the network settings for the Automatic

Transfer Switch depends on Boot mode, a TCP/IP option in the Network

menu. To use a DHCP server to provide the network assignment for the

Automatic Transfer Switch, Boot mode must be set to either DHCP &

BOOTP, its default setting, or DHCP only.