User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
8
Link-RX/TX ( 10 / 100 ) LED
This LED indicates the network status.
Condition Description
Off One or more of the following situations exist:
• The Management Card is not receiving input power.
• The cable that connects the Management Card to the network is
disconnected or defective.
• The device that connects the Management Card to the network
is turned off or not operating correctly.
• The Management Card itself is not operating properly. It may
need to be repaired or replaced. Contact APC Worldwide
Customer Support.
Solid Green The Management Card has valid TCP/IP settings.
Solid Orange A hardware failure has been detected in the Management Card.
Contact APC Worldwide Customer Support.
Flashing Green The Management Card is receiving or transferring data packets at
10 Megabits per second (Mbps).
Flashing Orange The Management Card is receiving or transferring data packets at
100 Megabits per second (Mbps).