User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
105
Tools
Use this option to initiate any of the following actions:
Uploading an initialization file (Web interface only). To transfer
configuration settings from a configured Automatic Transfer Switch to the
current Automatic Transfer Switch, export the .ini file from the configured
Automatic Transfer Switch, select the Tools menu on the current Automatic
Transfer Switch, browse to the file, and click Upload. The current Automatic
Transfer Switch imports the file and uses it to set its own configuration. The
Status field reports the progress of the upload.
Action Definition
Reboot Management
Interface
Restarts the user interface of the Automatic Transfer
Switch.
Reset to Defaults Resets all configuration settings.
This option will reset the
TCP/IP settings and enable DHCP and BOOTP.
Reset to Defaults Except
TCP/IP
Resets all configuration settings except the TCP/IP
settings.
Reset Only TCP/IP to
Defaults
Resets the TCP/IP settings only. This option will not enable
DHCP and BOOTP.
Delete SSH Host Keys
and SSL Certificates
Removes any SSH host key and server certificate on the
Management Card so that you can reconfigure these
components of your security system.
See How to Export Configuration Settings for information on the
content of the .ini file, how to preserve comments you add to the
file, and how to export settings to multiple Automatic Transfer
Switchs.