User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
103
Identification
Use this option to define the System Name, Contact, and Location values
used by the SNMP agent for the Automatic Transfer Switch. The option’s
settings provide the values used for the MIB-II sysName, sysContact, and
sysLocation Object Identifications (OIDs).
.
Date & Time
Use this option to set the date and time used by the Automatic Transfer
Switch. The option displays the current settings, and allows you to change
those settings manually, or through a Network Time Protocol (NTP) Server.
Set Manually. Use this option in the Web interface, or Manual in the
control console, to define the date and time for the Automatic Transfer
Switch.
Synchronize with Network Time Protocol (NTP) Server
. Use this option,
or Network Time Protocol (NTP) in the control console, to have an NTP
Server update the date and time for the Automatic Transfer Switch
automatically.
See also
For more information about the MIB-II OIDs, see the
PowerNet
®
SNMP Management Information Base (MIB)
Reference Guide (.\doc\en\mibguide.pdf) provided on the
APC Environmental Management System Utility CD.
An Apply Local Computer Time to Automatic Transfer Switch
option, which is available in the Web interface only, sets these
values to match the date and time settings of the computer you
are using to access the Web interface.
In the control console, use the NTP Client option to enable or
disable (the default) the NTP Server updates. In the Web interface,
use the Set Manually option to disable the updates.