User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
102
Configuring the RADIUS server. You must configure your RADIUS
server to work with the Automatic Transfer Switch. The following example is
specific to APC’s RADIUS server.
1. Define an APC vendor in your RADIUS server. APC’s Private
Enterprise Number, 318, is assigned by the Internet Assigned
Numbers Authority (IANA).
2. Define a RADIUS vendor-specific attribute called APC-Service-
Type. This is an integer with an attribute identifier of 1.
3. Configure RADIUS users. The APC-Service-Type attribute must be
configured for each RADIUS user accessing the card. This attribute is
set to one of the following values, which correspond to an access level
on the Management Card.
1 - Administrator
2 - Device Manager
3 - Read-Only User
For more information on user permission levels, see Types of
user accounts.