User`s guide

®
USER’S GUIDE AUTOMATIC TRANSFER SWITCH
97
System Menu
Introduction
Overview
Use the System menu to do the following tasks:
• Configure system identification, date and time settings, and access
parameters for the Administrator, Device Manager, and Read-Only
User accounts.
• Centrally administer remote access for each Network Management
Card by using RADIUS (Remote Authentication Dial-in User Service).
• Synchronize the real-time clock for the Automatic Transfer Switch with
a Network Time Protocol (NTP) server.
• Reset or restart the Automatic Transfer Switch interface.
• Define the URL links available in the Web interface.
• Set the units (Fahrenheit or Celsius) used for temperature displays.
• Access hardware and firmware information about the Automatic
Transfer Switch (control console only).
• Download firmware files (control console only).
• Upload user configuration files to the Automatic Transfer Switch (Web
interface only).
Only an Administrator has access to the System menu.