User manual

Page

Appendix A - Advanced Configuration A-1

Advanced Configuration and Setup A-1

System Configuration and Setup A-1

Bypass Mode A-1

Load Shedding A-2

Voltage Sensitivity A-2

Time Management A-3

Reset Energy Meter A-3

System Test A-3

GEN Source Type A-3

Generator Power Rating A-3

Generator Surge Overload Time A-4

Generator Start Mode A-4

Generator Start and Stop Relay Positions A-5

Generator Start and Stop Delay Times A-6

UPS (BACKUP2) Source Type A-6

UPS Power Rating A-6

UPS Surge Overload Time A-7

Reset to Factory Default A-7

Circuits Configuration and Setup A-7

Circuit Setup A-7

Circuit Load Types A-8

Circuit Source A-8

Delayable Circuits A-9

Circuit Maximum Time Off and Minimum Time On A-9

Circuit Security Mode A-10

Circuit Amp Rating A-10

Appendix B - Troubleshooting B-1

Troubleshooting Problems B-1

While operating on utility power, some of the loads keep shutting off B-1

While operating on backup power, some of the loads keep shutting off B-2

While operating on backup power, the generator’s breaker keeps tripping B-2

While operating on backup power, the UPS keeps shutting off B-2

UPS remains on battery with the generator running B-2

Circuit fault (no power on a circuit) B-2

Loads on Circuit 1 cannot be powered by the UPS B-2

Contents