User manual

A-10
Circuit Security Mode
Circuit Amp Rating
When security mode is enabled, the UTS automatically
cycles power to the circuit (two hours on, and two hours
off). This mode is for when you expect to be away
overnight, or for an extended period of time, such as when
you go on vacation.
Use this feature to configure a circuit to have the same
ampere rating (15 A or 20 A) as its corresponding circuit
breaker located in the load center.
Caution Selecting an improper ampere (A) rating can violate the electrical code. For
example, selecting a rating greater than the circuit breaker rating is a violation.
This can result in “nuisance trips" where the circuit breaker or fuse “trips”
frequently due to an over current condition.
Note
The circuit ampere (A) setting should be configured by your electrician during
initial setup and installation.
CKT1 SECURITY MODE:
OFF/ON
CKT1 AMP RATING:
15/20 AMPS
!
!