Specifications

Automatic Transfer Switch with Power Distribution 67
How to Allow Easy Access to the ATS
Display Interface
The front door of the ATS has a Plexiglas plate protecting access to the switches, circuit breakers, and
the display interface. If you want to access the display interface without opening the front door, you
can remove the rectangle of Plexiglas covering the display interface. The Plexiglas square is attached
to the front door by strong adhesive.
To remove the rectangle, open the front door and press firmly on the square from the outside of the
door, pressing toward the inside of the ATS. You may need to use a screwdriver or other flat tool to
pry the square from the inside of the door.