Specifications

Display Interface: Config
Automatic Transfer Switch with Power Distribution 47
Electrical Config
Factory Defaults
Manufacturer Data
System ID
The following items are available on this menu:
Voltage Input voltage rating for the ATS.
Switch Rating The amperage rating of the ATS.
Frequency The frequency rating of the ATS.
DC Backup Whether the ATS monitoring unit is receiving back-up power from the generator
battery.
Use this option of the Config screen to reset all ATS settings to their factory default values.
Use this option of the Config screen to display a scrollable list containing information about the ATS. This
information is useful when requesting service or product updates. The following information is displayed:
• Manufacturer Name
• Date of Manufacture
• Date of Calibration
• Hardware Revision
• Firmware Revision
• Serial Number
• Model Number
The following items are available on this menu:
System Name Set a unique name for your InfraStruXure Power Generation System.
Location Name the physical location of the system in relation to your data center.
Contact Identify the person to notify concerning questions or problems with regard to the
system.