Datasheet

990-3044B
1/2016
Customer support and warranty information is available at www.schneider-electric.com.
© 2016 Schneider Electric. All Rights Reserved. NetShelter is a trademark owned by Schneider Electric, S.A.S.
Removal:
Remove any attached screw.
Grasp the cage nut and squeeze the sides to release it from the square hole.
Installation
CAUTION
HAZARD OF FALLING EQUIPMENT
Never install cage nuts vertically with the ears engaging the top and bottom of the square hole.
This will result in insecure mounting for rack-mounted equipment.
Failure to follow these instructions can result in injury or equipment damage.
gen0188a
Installation:
From inside the enclosure, insert the cage nut into the square
hole.
Hook one ear of the cage nut assembly through the far side of
the hole.
Place the cage nut tool on the other side of the cage nut and
pull to snap into position.
ns1132b


ns1133b