Datasheet

External Baying Kit —AR8376, AR8376BLK, AR8377BLK
External Baying Kit — AR8376, AR8376BLK, AR8377BLK 7
Level the enclosures
The first step is to slide the enclosures together and align. Follow these procedures to make certain
the enclosures are level with each other. Leveling feet are attached under the enclosure at each corner.
The leveling feet can help provide a stable base if the selected floor space is uneven, but they are not
intended to compensate for a badly sloped surface. You can remove the casters and leveling feet to
allow the base of the enclosure to rest directly on the floor.
1. Move the enclosure to a level location.
2. Fit the 14-mm end of the open-ended wrench
(provided with your enclosure) to the hex head just
above the round pad on the bottom of the leveling
foot. Turn the wrench clockwise to extend the
leveling foot until it makes firm contact with the
floor.
3. Repeat step 2 for each of the remaining leveling
feet.
4. Use a level to determine which feet need further
adjustment to level the enclosure. Adjust as
necessary.
oln