Datasheet

4
Receiving, Inspection & Configuration
Warnings and
cautions
Before you begin to unpack the enclosure, read the following
warnings to prevent injury and damage:
• It takes at least two persons to unpack the enclosure.
• Stabilize the enclosure before installing the components.
Failure to do so could allow the enclosure to tip over.
Note: You can stabilize the enclosure by adding the
APC
Stabilizer Plate (
AR8115), or by joining two or more
enclosures together.
• Do not extend more than one component from the enclosure
at one time to prevent the enclosure from becoming
dangerously unstable.
• Load heaviest components first and place them toward the
bottom of the enclosure to prevent the enclosure from
becoming top-heavy.
Unpacking the
enclosure
The enclosure assembly is packaged for shipping. You must
unpack it before installing equipment.
 Shipping pallet  Brackets with 13 mm bolts

13/14 mm wrench
Continued on next page