Datasheet

ManualsBrandsAPC Manuals19" Floor CabinetsNetShelter CX Cabinet 18 HE Dark Grey

Model AR4038 & AR4038I

＞Physical capacity: 38 Rack spaces

＞Integrated APC PDU: 11 outlets NEMA

12 outlets IEC

＞Max thermal load recommended: 3.6kW

＞Noise reduction: 18.5dB

＞Power consumption: 101 watts

＞Weight: 200kg / 439 lbs

＞Equipment weight max: 250kgs / 550 lbs

＞Dimensions HxWxD: 1950x750x1130mm

77 x 30 x 44 in

Standard Features

Floor space requirements:

Enclosures are designed to be placed with their back

directly against a wall. Clearance of 200mm / 8” on

both sides of the cabinet is essential for normal

operation.

Ventilation system:

Each ultra-low-noise exhaust fan module has a

1.2 kW maximum recommended total thermal load

(or 4,100 BTU / hr). The 38U CX has 3 of these. The

24U Cabinet has 2 and the 18U Cabinet has 1.

Noise reduction:

18.5 dB broadband noise reduction, measured 1.0 m

/ 39” in front of the enclosure (

HP and Dell servers

A soundproofed ‘Server Room in a Box’ which

allows for IT deployment wherever and whenever it

is needed, saving space, cost and deployment time.

NetShelter

CX Enclosure

Model AR4024 & AR4024I

＞Physical capacity: 24 Rack spaces

＞Integrated APC PDU: 12 outlets NEMA

13 outlets IEC

＞Max thermal load recommended: 2.4kW

＞Noise reduction: 18.5dB

＞Power consumption: 68 watts

＞Weight: 170kgs / 373 lbs

＞Equipment weight max: 280kgs / 615 lbs

＞Dimensions HxWxD: 1285x750x1130mm

50.6 x 30 x 44 in

Model AR4018 & AR4018I

＞Physical capacity: 18 Rack spaces

＞Integrated APC PDU: 13 outlets NEMA

14 outlets IEC

＞Max thermal load recommended: 1.2kW

＞Noise reduction: 18.5dB

＞Power consumption: 39 watts

＞Weight: 138kgs / 304 lbs

＞Equipment weight max: 310kgs / 680 lbs

＞Dimensions HxWxD: 1015x750x1130mm

40.4 x 30 x 44 in

/ 39” in front of the enclosure (

HP and Dell servers

were used as noise source in noise reduction

measurements)

Mobility:

4 x heavy duty castor-type wheels

Front wheels have 360°rotation for manoeuvrability

and rear wheels have fixed front-to-back motion for

stability

Rear and side access:

Detachable rear side panels, left and right, for

equipment installation and maintenance access

Detachable rear fan modules gives completely open

rear rack access

Cable management:

75 mm / 3” width full-height vertical 0U accessory

channels located on each side at the front, middle,

and rear of the rack

Grounding:

All equipment installed within a NetShelter CX

should have conventional grounding via power

cables, but unlike conventional metal-case cabinets,

the NetShelter CX has no requirement for additional

grounding in the form of ground strapping or pipe

earthing etc. The enclosure shell is constructed

entirely from non-conductive materials and the rack

is completely isolated from outside contact.

Door locking:

Key operated lock

Warranty:

2 year warranty

Summary of content (2 pages)

PAGE 1
NetShelter® CX Enclosure A soundproofed ‘Server Room in a Box’ which allows for IT deployment wherever and whenever it is needed, saving space, cost and deployment time. Model AR4038 & AR4038I ＞Physical capacity: 38 Rack spaces ＞Integrated APC PDU: 11 outlets NEMA 12 outlets IEC ＞Max thermal load recommended: 3.6kW Standard Features Floor space requirements: Enclosures are designed to be placed with their back directly against a wall.
PAGE 2
Features and Benefits NetShelter® CX Features & Benefits 1. Soundproofed enclosure 2. Integrated ventilation fans 3. APC Power distribution included 4. Mobile, on heavy-duty castors 5. EIA spec 4 post 19-inch rack 6. Lockable front doors 7. Front & rear accessory rails, for cable management 8. Detachable side panels & rear fan-units for easy access.