Specifications

NetShelter AV 42 U Enclosure Unpacking, Installation, and Customization Manual18
2. Move the vertical mounting rail to
the desired location.
3. Check alignment. Note symbols
(circle, triangle, and square)
visible through the set of three
holes at each location, and make
sure the symbols match. If not,
realign the vertical mounting rail.
– Vertical mounting rails adjust
in 6-mm (1/4-in) increments.
– Make sure the vertical
mounting rails on both sides of
the enclosure are adjusted to
the same depth. Verify that the
same symbols are visible.
4. Lock the top, middle, and bottom
of the vertical mounting rail.
ns1624a
ns1623a