Specifications

9NetShelter AV 42 U Enclosure Unpacking, Installation, and Customization Manual
Joining Enclosures
Enclosures can be joined with or without side panels installed to provide for alignment and some
stability.
Caution: Joining enclosures provides limited stability to the enclosures.
1. Make sure the leveling feet are down.
2. Remove the front and rear doors.
3. Choose between 24-in centers or 600-mm centers (see the detail view below). If enclosures are
joined on 24-in centers, APC offers baying trim (AR7600) to cover the gap between the
enclosures. The trim can be installed after the units are joined together.
4. Align the enclosures and join them using one M5 x 12 flat-head screw (provided in the hardware
bag) per bracket—two brackets for the front and two brackets for the rear.
5. Reinstall the doors. (See “Moving the Enclosure” on page 7.)
ns1594a
24 in
600 mm