Specifications

DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
:: Seite 24 von 35 :: Datenblatt zum Produkt APC APC NetShelter VL 42U 600mm Wide x 1070mm no Sides Black mit DC# 473794 ::
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail ([e-mail]) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=473794
NetShelter VL Enclosure—Unpacking, Installation, and Customization 20
Installing Equipment
This section provides information on how to install rack-mount equipment in the NetShelter VL
enclosure. The instructions provided with the equipment provide more detailed information.
Identifying one U-space on the vertical mounting flange
When installing equipment, locate the top and bottom of a U-space on the mounting flanges. Every third
hole on the mounting flanges of a NetShelter enclosure is numbered to indicate the middle of a U-space.
A U-space consists of one of these numbered holes and one hole directly above and below it, as shown.
Installing cage nuts
APC offers a cage nut hardware kit (AR8100) for use with square holes.
Warning: Install cage nuts horizontally, with the ears engaging the sides of the square
hole. Do NOT install cage nuts vertically with the ears engaging the top and bottom of
the square hole.
1. Insert the cage nut into the square hole by hooking one ear of the cage nut assembly through the
far side of the hole.
Note: Install the cage nuts on the interior of the vertical mounting flange.
2. Place the cage nut tool (provided) on the other side of
the cage nut and pull to snap it into position.
Removing cage nuts
1. Remove any attached screw.
2. Grasp the cage nut and squeeze the sides to release it
from the square hole.
1 U
7
6
5
ns00 14a