Datasheet

NetShelter VL Enclosure—Unpacking, Installation, and Customization 16
6. Remove the hinges from the door and reinstall them using the set of holes directly below where
they were originally installed.
7. Rotate the door 180 degrees and reinstall the door. See “Installing the doors” on page 13.
8. Reinstall the grounding wire at the top of the door, near the hinges, and to the enclosure frame
using the M6 x 12 pan-head screw and star washer.
9. Rotate the door handle assembly 180 degrees and reinstall it using the screws removed in step 2.
ns0919a
ns0858a
ns1409a